|
Slot opening design
This type of house if preferred by some customers who
seem to have better success attracting bluebirds with this style. The front hinges up from the bottom and is
held in place with 1 screw at the bottom Features include the
following
-
All of my houses are handmade from quality material.
-
Assembled with rust resistant decking screws for
strength and durability.
-
It has a slot opening size of 1 3/8 in x 4 in.
-
There is ventilation located above the entrance hole
and on each side at the top of peak for cross ventilation.
-
The dimensions are 14 x 6 ¼ x 5 ½ in. Inside floor
dimensions are 4”x 4 ¾”.
-
Drainage and ventilation holes are located at each
corner of the floor by beveling the corners at 30 deg and mitered at
45 deg. This also helps in the prevention of blowfly infestation.
-
The front swings out for easy cleaning after the
nesting season by removing the screw on the bottom of the door. This
can also be used for inspection of the brood.
-
Predrilled mounting holes for mounting to a wooden
post, building, tree etc. Mounting brackets for mounting to a farm
T post are available for $1.50 ea. You can also mount to a 1” round
pipe and clamps, which are available at most hardware or plumbing
stores.
|